Call Us Now
Buy Now
E-Wood Paste

YouTube Facebook Instagram



E-Wood Paste

E-Wood Paste

Epoxy Wood Paste

E-Wood paste epoxy works excellent on window trims, small checks on log ends and other places where putty may be difficult to apply. As with any other epoxy, both the consolidator and wood filler consist of two parts, the resin (part A) and the hardener (part B). Mixing the two parts according to the manufacturer’s instructions starts a chemical reaction that causes the epoxy to harden.

Combine equal parts of E-Wood Paste by volume (A&B) and mix together by kneading or with a spatula until the color is uniform while wearing disposable gloves, mix no more than can be applied in 15 minutes.

Allow product to cure before sanding and staining.

E-Wood Paste is great for non-structural applications such as window frames and sills, doors and decorative wooden trim.

Comes with easy to mix applicator tube and nozzles.

back to top
E-Wood Paste Available Sizes

E-Wood Paste Available Sizes

Epoxy Wood Paste comes in multiple sizes to tackle any size project.

2 Gallon

2 Gallon

$332.99

Order Online
32-ounce

32-ounce

$72.99

Order Online
8-ounce tube

8-ounce tube

$32.99

Order Online
E-Wood Paste Product Information

E-Wood Paste - Spreadable Wood Epoxy

Features

  • Hardens damaged and rotted wood
  • Safe for indoor or outdoor use
  • Stainable and paintable

Resource Links

Application Temperature

40° to 90°F

Application Methods

By handheld applicator

Surface Preparation

Clean and dry
Restored with M-Balm

Shelf Life

1 Year

Special Instructions

See label

Drying Time

12-24 hours

Application Tech Tips

How To Use M-Balm & E-Wood

For log repair that doesn't require a log replacement, E-Wood Paste is a great product for non-structural applications. Read more.

About M-Balm & E-Wood Epoxies

Learn how our M-Balm and E-Wood work together to repair damaged logs. Read more.

Restoration FAQ

If your log home has an unknown finish, it's best to take it down to bare wood. If you know that it's been finished with Perma-Chink Systems products, you can clean and reapply finish or topcoat. For the best products to use, read this.

Restoration Reviews

Our contractor used the Strip-It product on the log home that we recently purchased. He used an airless sprayer and then pressure washed the home. It did a great job of removing the dark paint on it. Soon, we will be applying your Ultra-2 stain and Advance topcoat. We couldn't be more pleased with how our project is going so far, so thank you Perma-Chink!
Myra
We received your samples of S-100 and Strip-It to try on our logs. Strip-It worked the best as our finish remover. We were able to leave it on overnight and we used a pressure washer to remove the old finish the next day. Now we are continuing the restoration process and are planning on using more products from Perma-Chink Systems.
Roosevelt
I found this product to be fairly easy to work with. Our home had a couple of places where animals had chewed on the logs in the past, so we wanted to fill in those areas. We cleaned those areas up, then applied a little M-Balm, and then put the E-Wood right on top of it. We had to sand it down a little, but it does look pretty good so far. We are going to stain over it soon.
Cecily
As a log home restoration company, E-Wood is used in many applications for restoration. We use it on broken or cracked wood, and fill in where knots have fallen out of pine boards. It is easy to use: Mix equal parts with your hands (use gloves), shape and apply to affected area. Let dry, sand and stain. It does not shrink or pull away. It is a good product: Thank you, Perma-Chink!
Stuart

Restoration News

About M-Balm & E-Wood Epoxies

Media Blasting Versus Chemical Stripping

About Pressure Washing

How to Repair Large Voids in Logs