Sanding disks provide superior results over high-grinding disks.

• A corresponding diameter sanding disk holder is required for use
• Available in diameters of 4", 5" and 7" in coarse, medium and fine grit
• For use with low speed angle grinder

These buffing brushes are ideal for surface preparation after removing a finish by chemical stripping or media blasting.

• Requires a buffer or polisher with 5/8 x 11 UNC threads, 10 amp motor, 600-3,000 RPM Variable speed
• Nylon fibers impregnated with Ultra Grit abrasive
• Long Lasting

High quality stain brushes for interior and exterior use.

Use these to "tool out" log home chinking and sealants. Spatulas and trowels are instrumental in creating a smooth sealant finish after applying Perma-Chink, Energy-Seal, Woodsman, or Check Mate 2. 

Use to apply Log Chinking and Sealants.

Small Bag	Large Bag
$9.99 - Call to Order	$10.99 - Call to Order

Log and Timber Fasteners

We’ve made some changes to our new Log Boss fasteners. At the request of many of our customers we’ve brought the wings back and redesigned the head for better counter sinking and a 5/16” hex head driver.

The wings reduce the friction between the wood and the shank and clear out the splinters created as the fastener pulls down into the wood. This reduces the torque required to set the fastener into place. So if you want a fastener with maximum holding power and superior strength with less work, Log Boss is the answer. These fasteners were specifically designed by Perma-Chink Systems for the construction of log and timber structures. Their 3” long thread provides the grip necessary for pulling even the most difficult logs into place while the larger shank diameter increases the overall strength and pulling power.

Internal Log Sealant

Log Home Gasket Tape is closed-cell, medium density (8 lb.) PVC foam with pressure-sensitive adhesive on one side. Gasket Tape provides a high performance seal against dust, light, air and moisture.

Install Log Home Gasket Tape between log courses during construction to form a uniform seal between the logs. It is flexible and maintains a seal during seasoning of the logs. Log Home Gasket Tape stays pliable from -5°F to 170°F. Gasket Tape is compatible with Shell-Guard and Armor-Guard.

Log Home Gasket Tape is 3/8" thick and available in widths of 3/8", 1/2" and 1" in 25-foot rolls. Consult your log home manufacturer for the correct size for your log package.

Closed-Cell Foam Rope

Backer Rod is extruded closed-cell polyethylene rod that is used in cracks, checks and gaps before filling them with sealants such as Perma-Chink, Energy Seal and Check Mate 2. Caulk joints should not be more than 3/8” thick and Backer Rod provides a way to fill a deep crevice or gap while maintaining the proper sealant thickness for maximum performance. Backer Rod should also be used in checks over 1/4” wide before applying Check Mate 2.

• Closed cell polyethylene
• Will not absorb water
• Heat and cold stable.
• Should be used to assure proper thickness of sealants including Perma-Chink, Energy Seal and Check Mate 2

Grip Strip - Trapezoidal Foam Backer

Grip Strip is chemically inert closed-cell polyethylene that is shaped to fit between log courses to form a flat surface for the application of Perma-Chink or Energy Seal. This makes it easier to maintain a consistent thickness of sealant across the seam, reducing the amount of sealant required and improving the sealant’s performance.

• Provides a firm chinking or caulking surface
• Shape and texture allow it to be easily installed without using staples, nails or glue
• Repels water
• Compatible with all commonly available synthetic chinking
• Helps prevent blistering of chinking surfaces
• Provides extra insulation against heat loss
• R-value for Grip Strip: 1.2 for 2.5" & up; .9 for 1.25"-2"; and .6 for 1" & under

Glass Blasting Media

Use with Blaster Buddy and a commercial air compressor for a "dry" method of finish removal.

50lb bag covers approx. 75-200 sq. feet.

(this product is not eligible for free shipping)